Why do undershot defects occur during injection molding?

Why do undershot defects occur during injection molding? After any special situation occurs, we need to analyze what caused the special situation to find out the correct strategic solution. After summarizing by experienced engineers, the following are some of the reasons.

The main reason for the lack of injection is that the flow resistance of the molten plastic is too large, so that the melt cannot continue to flow. Factors that affect the flow of molten plastic include: plastic part wall thickness, plastic injection mold temperature, injection pressure, molten plastic temperature, and plastic material composition. These factors can all lead to defects.

If the plastic product has a thinner structure near the gate, or at a position perpendicular to the flow direction, generally the position of the steel bar, then during the injection molding process, the molten plastic will encounter greater forward resistance when passing through this position, But because the main channel flows smoothly and there is no flow pressure, only when the melt fills or enters the pressure in the direction of the main channel, will it form enough pressure to fill the stagnant part. At this time, because the position is very thin, the plastic melt does not flow, Without heat supplement, it cools and solidifies, causing attention.

If you have plenty of time, you can learn how to take care of CNC Lathe Machining Service. Also, invest in the right rapid prototyping supplier OUR SERVICE.

Check out Vowin for optimal quality products, and get your OUR SERVICE problem fixed. Send us an enquiry or make a call if you are interested.

OUR SERVICE are raising the stakes of social marketing, but they also ease the sales process by providing ways for CNC Turning Milling Service to effectively interact with customers.

As a top provider of products, Shenzhen Vowin Model Design CO.,LTD will surely meet your urgent need for OUR SERVICE solutions. Go to Vowin.