How to place the order?
1.You send us drawing or sample;
2.We make the sample and send the picture or video to you for reference;
3.You think the sample is good then place an order and pay us deposit;
Hot Runner\ Cold Runner
Pro/E, Solidworks, Unigraphics, Catia, Auto CAD, IGS, STEP, STL, X_T，PDF,Ige,Iges,stp etc.
L/C, Paypal,T/T West Union,etc.
50% in advance, 50% before shipment
Wood case or carton box,
1,With plastic bag,with pearl-cotton package.
2,To be packed in cartons or wood case.
3,Use glues tape to seal cartons.or pin tight the wood case with nail.
4,Deliver out by DHL,FEDEX.
Or according to customers' requirement.
➤ Difficulty in mold opening: Some structural designs have fulfilled the functional requirements, and prototype tests have also been done. When preparing for mold opening, it was discovered that partial mold opening was difficult, and the structure had to be changed again, which extended the development cycle
➤ Increase the complexity of the mold: the mold structure becomes more complex, which means that the cost of the mold increases. A reasonable structure design can simplify the mold structure, thereby reducing the mold cost and increasing the mold life.
➤ Increasing the cost of mass production: injection molding materials with the same structure and different sizes will get different physical properties. A good knowledge of the physical properties of the material can give the best product parameters (wall thickness size, matching position size) during design to avoid causing Unnecessary material waste.
Commonly used injection materials: ABS PP PE PC PA POM PBT PMMA