Silicone prototype models We often use TV remote control prototypes, but we don't know how they are processed. Today we will briefly introduce the details that should be paid attention to during the production of silicone prototypes. The silica gel used in the hand model making cable has the following characteristics: 1. Low viscosity, good fluidity, easy operation; 2. Small shrinkage, no deformation; 3. Suitable for small batch mold replication; 4. Good weather resistance, high and low temperature, Acid-base, aging. The following details should be paid attention to in the production of silicone hand-plate model molds: (1) The proportion of silicone curing agent should be accurate. Group A silicone, B group curing agent, the general amount of curing agent added is 2%-3%. (2) Vacuuming Stir the silica gel and curing agent evenly according to a certain ratio, and then carry out vacuuming treatment. (3) Degassing The mixed rubber should be degassed before filling the mold. (4) Handle the original model Handle the original model or the product to be copied. (5) Surface treatment Use liquid paraffin or surfactant as a release agent. (6) Curing and demoulding The model after mixing and degassing needs a certain temperature and time for curing. Finally, let me tell you that you need to pay attention to the mold making of the silicone prototype model. The tensile force of the silicone mold will decrease after vacuuming. As the number of mold turning decreases, the mold will not be smooth, which will directly affect the quality of the product.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist