In the process of injection molding, time control is very important, and it will affect the quality of the entire finished product. In order to do a good job in injection molding processing, in addition to skilled operation, you must also have the ability to control the processing time. Because if the time control of some steps is not good, there may be problems in the products produced. So what exactly do you need to control your time?
Vowinprecision engineers will take you to understand
1. Injection time
In the processing of injection molding products, glue injection can not only protect the product, but also make the product more shiny. However, it is not easy to master the time of glue injection, because it is not only necessary to consider when injecting glue The injection time also takes into account a series of factors such as pressure, speed and temperature, so it is difficult to control.
2. Low voltage protection time
During this time, first set the protection time to two seconds, but according to the specific situation, add a delay of a few tenths of a second, so that it can play the role of low-voltage protection.
3. Cooling time
The cooling time should be set according to the specific shape of the product, but the cooling time should be longer than the sol time, and the product must be fully shaped.
4. Holding time
In order to ensure that the size of the injection molded product can meet the requirements, the pressure holding time is very important. When holding the pressure, let the gate cool before the solution is reversed. This time can be determined according to the gate.
Competitiveness policy of Shenzhen Vowin Model Design CO.,LTD is about existing clusters as a platform for upgrading microeconomic fundamentals, where structural policies aim to change the industrial composition of an economy more directly.
If you are looking for an excellent service in the UK then you can go to Shenzhen Vowin Model Design CO.,LTD. They have almost everything what you might require for your Prototype factory.
Visit Vowin to find recent dynamics of OUR SERVICE and contact Shenzhen Vowin Model Design CO.,LTD for the latest and most capable in global market.
The first machine to produce CNC Lathe Machining Service, the stainless steel CNC turning Parts OUR SERVICE was invented in 5 Axis CNC machining service in
rapid prototyping supplier by CNC Machining Aluminum Parts and was subsequently improved.
In terms of OUR SERVICE, why is it different than other production? How does it fit a true need or desire for your requires? Is it simple to use? Make life easier?
