0086-0755-2998 1995

返回Silicone Mold
You are here: Home > Services Items > Silicone Mold
Vacumm Casting(5-100pcs)
Detailed description

Vaccum Casting

Vaccum Casting, also called Vaccum Membrane, means making a complicate procedures of deaeration, agitation, preheating, casting to castables in vacuum atmosphere, in addition, proceed two-three hours secondary curing molding in the constant environment of 60℃-80℃, which applies to the small batch quantity trial-manufacture that has complicate structure, homogenizing wall thickness as well as satisfy certain function requirement in the course of product development.

Applicable mould: silastic mould

Casting material: two-component polyurethane, the present material adopted: AXSON polyurethane resin, Hei-cast polyurethane resin.

Physical function: similar to ABS, PP, nylon, PMMA/PC clear parts, soft silicone parts (40-90 shord D),heat-resistant parts (150℃),fireproofing material etc.

Standard replication precision: ±0.2mm/100mm

Casting exemplar thickness: minimum 0.5mm, optimum 1.5mm-5mm

Maximum casting workpiece: 2000mm×1200mm×1000mm

4.jpg

Copyright (c)2017 Vowin Technology Co., Ltd. All Rights reserved.
Address: Room201,Blk.B, Wanli Ye Science Park,Chongqing Rd.,Fuyong Town,Bao'an District,Shen Zhen, China 518101
Fax: 0086-0755-29981996  E-mail: vowin@vip.163.com    website:www.vowin.com